CORE PRO X SUPER ABSORBENT

A state of the art cutting edge absorbent available to our clients for all their absorbent needs. Made from locally sourced recycled materials there is no other absorbent as effective as this in the whole of Africa. This absorbent can be utilised in separator pits to reduce disposal costs and ensure that your separator pits work effectively all of the time. The absorbent is highly hydroscopic and therefore once it has attached to the hydrocarbons it will not sink but will float allowing you to collect the floating oil with a pool net and dispose of it in the hazardous waste skip or recover it for recycling.

Contact us for Purchases

A synthetic, eco-friendly polymer absorbent made up of 85% recycled waste material, once destined for the landfill. Core Pro X Super Absorbent absorbs and solidifies hydrocarbons in seconds. On your workshop floor, oil separation tank or contaminated body of water, the incredible hydrophobic and absorption properties of Core Pro X Super Absorbent will save time, money, water and the environment.

Application: Core Pro X Super Absorbent is applied directly to the spill at a ratio of 1 – 10 by weight, this ratio may vary depending on the viscosity and type of contaminant.   As a “rule of thumb” apply a 2 cm thick layer of Core Pro X Super Absorbent covering the spill.  Allow 30 seconds for the “wicking” action to start and agitate with a broom for a speedy clean – up.   Alternatively Core Pro X Super Absorbent can simply be left to work by itself.  Once the contaminant has been solidified, sweep up and dispose of in accordance with local regulations.  For water born spills, scatter the Core Pro X Super Absorbent over the affected area, if there is no natural wave action or water movement agitate for a speedy clean – up.  Alternatively Core Pro X Super Absorbent can be left to float endlessly on water absorbing any hydrocarbon it makes contact with (ideal for separation systems).  Scoop up the solidified hydrocarbon with a net and dispose of in a responsible manner.   In windy conditions empty 5 liters of water into the bag valve and shake prior to application. Core Pro X Super Absorbent will not absorb water (hydrophobic) having no adverse effect on performance.  The saturated Core Pro X Super Absorbent can then be pressed, the oil extracted for recycling and the left over absorbent material is an excellent fuel – source with high calorific properties and minimal ash. Core Pro X Super Absorbent booms, pillows and socks are used for the containment and curtailing of spills on water or land where the hydrophobic and absorption properties are still unrivaled.